A farmer’s guide – How to make a log splitter wedge?

With the advancement in technologies, the people of today’s era prefer the modern and latest equipment for almost every task. However, the log splitter wedge is demanded by a large number of farmers and is still utilized to this very day by many.  Usually, it is troublesome and hard to split the logs on your own but no need to worry now as the diverse machines are mainly designed to get your task done easily and within a short period of time. But if you are looking out for the answers of how to make a log splitter wedge and which splitter is effective then here is a brief guide from Handyman Tips to help you choose the top-most log splitter.

You can easily access a wide variety of log splitter with diverse shapes and sizes in the market. But there are certain factors to be considered before opting for a right one. Some of the major factors include: cost, consistency, time, and size. Following the basic woodworking tips is also a must! Now let’s discuss the steps to create a log split wedge easily at the comfort of your home.

How to make a log splitter wedge?

Breaking the logs with your hands is not only painstaking but it also consumes time and effort. Though electric splitters are effective and easy to handle, the same are rather expensive. If you want to create your own DIY log splitter then look into our advice and follow the below-listed steps:

• Step 1 – join the blades together
  In order to fuse the four blades of the splitter in a way that each intersects each other, you should take out the innermost angles of each. Once you have removed the inner corners, place the first two blades at 90 degrees. Similarly, take the other two blades and weld them in the same way.
• Step 2 – connect the blade to the pipe
  Make sure to wear safety equipment before performing this step to ensure safety. Take a 15-20 inch-long pipe and cut down one of its notches to make it correspond to that of the blades. Once your blades are ready to be welded to the pipe, take the support filler bar and attach the blade to the pipe.
• Step 3 – set up a hydraulic pump
  The hydraulic pump should be installed according to instructions provided in a way that it’s capable to handle the force of 1600 pounds per inch. This pressure is sufficient enough for a regular log splitter but if an unstable installation, your splitter might collapse and fail.
• Step 4 – weld the prepared blade with the hydraulic pump
  The ultimate step to finishing a DIY log splitter is to connect your blades to the pump. Make sure that it’s not turned on as it can lead to severe injury. Once the system is properly fitted, your log splitter wedge will be ready for use.
  

Which log splitter can ease splitting firewood?

In order to save time and cost, here are some inexpensive and effective log splitters that could aid you to for cutting logs with an ease:

• Small and portable – Small and portable logs are mainly used during the cold winter season for shatter bigger logs so they can fit smaller fireplaces.
• 30-Ton powerhouse – if you are looking out for the best wood splitter that can help you transform huge trees into piles of firewood then a 30-Ton powerhouse can be a top-class choice.
• Manual log splitter – manual log splitters are easy to design. These units are comparatively cheaper than most splitters on the market. Although it is prepared of grease, it is compatible to cut large woods easily than that of an axe. The major advantage of opting for the manual log splitter is that this type of units, basically, comes in a low weight and thus, can be easily stored. Generally, there are two kinds of log splitters i.e., the one that can be operated by the hydraulic system whereas the other type requires manpower and weights. Whether you are a regular wood burner or perform the wood splitting on a regular basis, the manual log splitter can be best possible choice.
• Electric log splitters – electric log splitters work similar to gas splitters, however, the only difference is how you power it. With a compact size and structure, electric log splitters are generally light in weight and hence, can work in the ground, on a stand, or on a counter. Apart from that, they require minimum maintenance and can be used both indoor and outdoor.
• Gas log splitters – gas log splitters are mainly designed for larger pieces of wood with large diameters. since this machine works with gas, it requires regular maintenance such as changing the oil filter, fuel usage, plug replacements, and etc. The major benefit of gas splitters over electric splitters is that it can effectively cut larger logs easier. However, these systems are comparatively expensive than that of the electric and other splitters as they require continuous maintenance.

The log splitters are available in various types and sizes and you choice depends entirely on what you need in particular. For instance, the gas log splitters can work well for those using their stove or fireplace on a regular basis. At the same time, manual log splitters and electric splitters are the best option for occasionally splitting wood.

However, you should always keep the risk of harm in mind. If you’re planning to start a proactive live of DIY woodworking and craft, then consider health insurance because accidents do happen.