Choosing the best roofing system when building or buying a new house is crucial to ensure that your house is fully protected against harsh weather conditions. In residential buildings, the commonly used roofs are pitched roofs with sloping surfaces. But why should you even consider installing a pitched roof design for your house?
Is it worth it? It’s time for you to find out!
Low Maintenance Cost
While pitched roofs are generally more expensive than flat roofs, the maintenance cost is lower over time. Because of the sloped design of pitched roofs, water easily drains and won’t retain or cause roof damages. Of course, you have to make sure that you only entrust your roofing system to a dependable and experienced roofer, like Rubberoofs – Pitched Roofs.
You’ll Set Up an Attic
A pitched roof has a slope angle of usually more than 20 degrees, and some pitched roofs are more specific, with two slopes (over 10 degrees) that meet at the center. If you’re planning to set up an attic at home, having a pitched roof design will create more space for the attic. Insulating your attic roof is important if you will regularly use it or are planning to convert it in the future. It’s important to insulate the roof’s inner surfaces to avoid the escape of indoor air and avoid too much heat (during summer) or cold (during winter) getting inside the attic.
Here are the good-to-know facts about insulating a pitched roof:
- The correct approach when insulating a pitched roof is installing an inner roof lining to ensure that dust, water, or snow won’t enter your home. Remember that moisture is the number one enemy of insulation.
- You can choose from insulation boards (fitted under the roof) and mineral wool (inserted between beams). Mineral wool is a compressible material, so it causes fewer cracks, and it is easy to fit.
Avoid Leaks
A roof that is more sloped is less prone to leaks. That’s why a pitched roof design is more preferred than flat roofs. It is because pitched roofs have a sharp slope, which makes it easy for water to drain. On the other hand, flat roofs retain and accumulate water, which needs proper drainage because of its gentle slope.
Here are the advantages of a leak-free roof:
- Expect longer roof lifespan
- Less roof damage
- Lower repair and maintenance costs
- Peace of mind
Flexible Roofing Designs
The roofing system you use greatly influence the general look of your house. Choosing the right roofing design will make a big difference in the aesthetic appeal and functionality of your roof. While flat roofing provides limited roofing design choices, it’s easier to create various designs with pitched roofing. One important consideration when installing a roofing system is choosing the best material for a new roof. It should be hard or durable enough to withstand drafts or environmental elements to avoid replacing it too soon as expected. Generally, metal roofs are the most preferred choice because it’s lightweight and durable.
Here are the different types of pitched roof designs:
- Mono Pitch Roof: It’s a pitched roof design that slopes from one side to another, which was commonly used in forming extensions during the Victorian era. For residential construction, it consists of a series of rafters that are fixed to the walls at either end to support battens wherein the roof covering is usually fixed.
- Couple Roof: It’s considered the simplest form pitched roof design with two lengths of rafters or timber that lean against one another.
- Closed Couple Roof: It is a more secure type of couple roof because of additional ceiling joists, which serves as a tie that prevents the outward wall deflection. The joist increases potential roof-span and supports a flat ceiling.
- Collar Roof: This roof allows the construction of upper rooms in the roof space. The height of the ceiling joists is raised, which is higher than the rafters.
- Purlin Roof: This roof has increased rafter sizes, which increases potential roof spans. Don’t worry because the stability of the roof is never compromised. Rafters have extra support without needing to be heavy and thick.
Conclusion
When it comes to pitched roof design, you’ll greatly benefit from it because it minimizes or eliminates leaks or water retention in your roofing system for a long-lasting roof. Also, the designs are flexible enough so you can choose the best-pitched roof design for your home, and have a lower maintenance cost than flat roofs. If you’re planning to construct an upper room or attic, choosing a pitched roof design is a smart idea.
