How to cut and remove a tree stump with a chainsaw

The idea of felling a tree seems easy-going until you only have to cut the tree. But what if you realize that you also have to remove its stump. Cutting tree stumps is a difficult task because, in this case, you will have to cut tough tree roots. We might not have any idea of how firmly the roots of a tree stump are bound to the soil. Therefore, many people often ask the question, “How to properly remove a stump with a chainsaw?”

How to cut and remove a tree stump with a chainsaw

The answer to this question is quite simple and explainable with the help of a step-by-step guide written by powertoolspro.net. By taking all the safety measures, using a good quality chainsaw, proper instructions, and a few tips, you can easily cut and remove any kind of tree stump you want to discard. Let’s check out some tips and tricks for this process.

Safety First

Before cutting and removing the tree stump with a chainsaw, you should wear all the safety gear. Choose a logger helmet that covers your head. It will keep you safe from the wooden bits falling off towards your head. Moreover, chainsaws cause a lot of tree bark to fall apart, so protect your eyes and face with a face shield and safety glasses. When using a professional chainsaw, your hands and arms are the closest to the running blade. Therefore, you should use gloves for hand protection. However, to safeguard your arms, use arm guards or safety jackets. During the cutting of tree stumps, the risk of falling wood parts on one’s legs and feet increases. So, to protect your legs and feet, wear either safety pants or chaps. You can also choose to wear boots. Plus, to protect your ears, use high-quality earmuffs.

Is there any fastest way to remove a tree stump?

Yes, among all the methods of removing a tree stump, there is the fastest way to speed up this process. In this case, you will have to grind the stump with a chainsaw using a grinder. This method is rapid, and you can easily grind down the tree stump in a few hours if you follow an appropriate method and grinder. You can either hire a specialist to discard the tree stump or buy a good-quality grinder.

Step by Step process to cut and remove a tree stump with a chainsaw:

Here is a step-by-step guide for discarding a tree stump:

Trimming the stump

A tree stump is easier to remove when it is closer to the ground. Therefore, if you are cutting a tree, try to cut it off from as close to the ground as possible. In this way, you will be left with a smaller and closer tree stump to the ground. But, if you have a tree stump whose height is high, then trim the stump with the assistance of a chainsaw. Hence, as you are only trimming the stump, apply moderate pressure to the stump. Because if you trim the stump at low or high pressure with a chainsaw, you will end up either sticking the blade of the chainsaw in the stump or rendering the tool kickback.

Digging around the stump

When you are finished trimming the stump, dig around it to discard all the dirt, identify all the roots of the stump and uncover them for cutting. Digging is a strenuous method of shoveling dirt, but it is an important step in this process. To start digging, use a spade and shovel as much dirt as you can with the spade. But if you find it difficult to remove dirt, use a mattock to dig in the soil. You can also use other digging tools. Keep digging until you reach at least 2 feet under the ground. But, if you still see that some roots of the stump aren’t exposed, keep digging until you see all the roots.

Cutting tree roots with a chainsaw

Cutting the roots of the tree stump is a basic part of removing the stump. Although this step seems exhilarating, it is quite simple if you are using a good chainsaw. But, before cutting the roots, ensure that all the roots of the tree are fully exposed. Moreover, remove all the dirt around the roots. Because, if you use a chainsaw on roots full of dirt, you will end up injuring yourself. To cut the roots, turn on the chainsaw and cut down all the roots one by one at medium speed.

How to cut and remove a tree stump with a chainsaw - cutting roots

Detaching the stump

After cutting all the roots, raise the stump from the ground and detach it from its place. This is the hardest step of this process, and it requires enough power to detach the stump from the soil. The reason is that the tree bases are hard and firmly attached to the ground. Therefore, lifting the stump requires a wise method. To detach the stump, use digging bars. These bars will help you lift the stump off the ground, so you can easily remove it.

Abolishing the tree stump

This step of the process is the easiest and most simple. But, it is still a useful and protective task to prevent any accident and to avoid any kind of wood pest reaching other trees. Hence, abolish the tree stump to scratch. Put the tree stump, along with its roots, into the garden trolley. Make sure to remove all of its remains. If the stump is small and not feasible for firewood, go to a faraway place, apply the fire, and burn it down. But, if the stump is large enough, contact any park department to give them the stump for disposal. Furthermore, if your tree stump is very old, you can also sell it to a research center and get a fee in turn.

Conclusion

After thoroughly examining and using this process of cutting and removing a tree stump, we are sharing it with you. But before using this method, make sure to take all the safety measures and follow each step carefully.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top