How to Install a Peel and Stick Wallpaper Mural: Tips and Tricks for a Flawless Finish

Published On: June 4, 20230 Comments on How to Install a Peel and Stick Wallpaper Mural: Tips and Tricks for a Flawless FinishTags: Last Updated: January 29, 20242.9 min read

Have you fallen in love with a stunning peel and stick wallpaper mural but are feeling a bit intimidated by the installation process? Don’t worry, you’ve got this! With a bit of patience, preparation, and the right tools, you’ll have a gorgeous accent wall in no time.

girl installing peel and stick wallpaper

In this blog post, we’ll guide you through the steps of installing a peel and stick wallpaper mural, as well as share some tips and tricks for a flawless finish. So roll up your sleeves, grab your tools, and let’s get started!

Step 1: Prepare Your Wall

The first step in installing a peel and stick wallpaper mural is to prep your wall. Start by removing any old wallpaper, filling in any holes or cracks, and cleaning the surface with soap and water. Once your wall is clean and smooth, you can apply lining paper or wallpaper primer if you wish. Primer and lining paper is not necessary and shouldn’t make a difference to the wallpaper, but may make the bond stronger!

Step 2: Measure Your Wall

Measure the width and height of your wall and enter the sizes on your chosen design on WallpaperMural or Peel & Paper. When you order from these specialist websites, they will send you exactly the right amount of wallpaper with the drops pre-cut so it will look perfect on your wall. This method of ordering makes for a MUCH better look at the end, as you won’t trim off important design features.

Step 3: Peel and Stick

This is the fun part! Peel off the backing paper from the first panel of your mural and gently apply it to the wall. Smooth out any air bubbles or wrinkles with the included wallpaper smoothing tool or a plastic card, working from the center outwards. Be patient and take your time to avoid any mistakes. Butt join the next panel to the first, and repeat this process for each panel until your mural is complete.

sticking wallpaper to wall

Step 4: Trim and Finish

Once your mural is up, it’s time to trim the edges using a sharp utility knife and a straight edge. Use a light touch and make sure to cut along the edge and not into the wall. If your mural has any gaps or seams, you can use a wallpaper seam roller to press them down and ensure a neat finish. Take a step back and admire your handywork, you’ve just transformed your space!

Tips and Tricks

– Measure twice, order once! Take your time when measuring your wall to avoid any mistakes that may cause you to order the wrong amount. Take special care when selecting the units you measure and order in!

– If you’re dealing with a wall socket or light switch, cut a hole in the wallpaper to fit around it. Make sure to turn off the power beforehand and use a voltage tester to ensure the area is safe.

– Smooth over the entire mural after 24 hours when the wallpaper has settled onto the wall for a completely flawless look

Installing a peel and stick wallpaper mural may seem daunting at first, but with a bit of patience and preparation, it’s a job you can easily tackle yourself. Remember to prep your wall properly, measure accurately, and take your time when peeling and sticking. With the right tools and a little creativity, you’ll have a stunning accent wall in no time!



Share This Tip With Your Friends!

About the Author: Handyman tips team

The Handyman Tips Team is a group of authors that provides tips on the Handyman Tips website. The Handyman Tips team consists of real handymen, contractors, carpenters, woodworkers, and experts in home repairs, appliance repairs, and landscaping. The team is always there for visitors to the Handyman Tips website. If you can't find the answer to your question on the Handyman Tips website, one of them will reply to you almost immediately if you contact them through the Ask the Handyman page!

Leave A Comment