Furnace safety tips

Published On: November 7, 20170 Comments on Furnace safety tipsTags: , , Last Updated: February 13, 20243.8 min read

Winters can be pretty intense and your heating system must be up to the task. There are many safety tips that you will need to take into account when you are planning to make it through the colder months of the year. These furnace safety tips will make your life easier during long winter months. Your furnace is going to be one of your most frequently used appliances during the winter and you need to make sure you are going about using it safely. Here are some practical furnace safety tips.

Furnace safety tips

Make sure you have a clean air filter

One of the most crucial elements of your furnace is the air filter. With a dirty air filter, you are going to contaminate the air in your home. This could lead to unnecessary allergies and other respiratory problems. Having a clean air filter before the cold winter months come about will help you to feel safe about the furnace you are using all winter long. Installing an air filter is a pretty simple thing to do. Workers at your local hardware store will be able to help you find the right filter if you simply take your old and dirty filter with you. There are also tutorials online that will help you learn to remove and install your air filters.

Have a check-up on your furnace each year

There are problems that can be brewing in your furnace that only professionals will be able to spot. This is why it is important to book a check-up with a professional. These professionals have had many years of experience knowing what causes problems with furnaces. Their expert opinion will be able to spot a problem before you start using your furnace every day, which could help prevent needing furnace repair. Make sure you have a check-up in order to spot small problems that could turn into big ones over the course of the winter.

If your furnace isn’t working properly you it should be repaired only by licensed professionals like Furnace Repair Denver.

Check up inspection list on gas and oil furnaces is different. If you want to do a check up the furnace yourself or you want to make sure that the professional that you hired checks everything, we’re bringing you the checklist fro gas and oil furnaces.

Gas Furnace Checklist

  • Check vents
  • Analyze combustion gases
  • Check blower door
  • Check for blockage at intake points
  • Inspect heat exchanger
  • Inspect burners
  • Check drainage system including internal hoses
  • Check drain and trap
  • Remove and inspect blower wheel
  • Test the amp-draw on motor
  • Inspect belts
  • Inspect wiring
  • Check filters

Oil Furnace Checklist

  • Check overall condition
  • Clean heat exchanger
  • Remove/clean flue pipe and chimney base
  • Inspect clean-out doors
  • Inspect oil burner
  • Inspect and replace oil nozzle
  • Inspect end cone
  • Inspect electrodes and belts
  • Replace oil filter
  • Replace fuel pump strainer if applicable
  • Inspect flame sensor
  • Inspect electrical system
  • Oil motor if applicable
  • Clean burner fan
  • Check pump pressure
  • Check vacuum readings
  • Perform safety check
  • Check combustion efficiency
  • Ensure the fire is clean
  • Check carbon dioxide
  • Check fuel level

Furnace safety tips - furnace parts diagram

Make sure your carbon-monoxide detectors are functioning properly

Carbon monoxide is a deadly gas that takes the lives of far too many homeowners every winter. While this is a problem that can be fatal if undetected, with the proper safety equipment, lives can be saved. Make sure that your carbon-monoxide detectors are working properly. With outdated and broken detectors, you could have a carbon-monoxide problem that would prove to be deadly. However, with working detectors, you can get your family to safety if there is ever an issue with your furnace that threatens your family’s safety.

Clean the area around your furnace

House fires are another big problem that affects families during the cold winter months. Simply having clutter around your furnace can result in a deadly fire. A quick clean up could make the area around your furnace much safer. Make sure that any fabrics, lint, or other flammable materials are far away from your furnace before you start using it on a regular basis.

These are just a few of the many furnace safety tips that can help you during the winter months. Using your furnace on a daily basis doesn’t have to be a dangerous thing to do. Tuning up your furnace doesn’t cost much and you can have your furnace tune up every year by respected companies like SWAN Plumbing, Heating & Air of Denver.


Share This Tip With Your Friends!

About the Author: Handyman tips team

The Handyman Tips Team is a group of authors that provides tips on the Handyman Tips website. The Handyman Tips team consists of real handymen, contractors, carpenters, woodworkers, and experts in home repairs, appliance repairs, and landscaping. The team is always there for visitors to the Handyman Tips website. If you can't find the answer to your question on the Handyman Tips website, one of them will reply to you almost immediately if you contact them through the Ask the Handyman page!

Leave A Comment