4 Tricks for Spotless Concrete Cleaning

Published On: March 30, 20210 Comments on 4 Tricks for Spotless Concrete CleaningTags: Last Updated: February 7, 20244.4 min read

Concrete floors have become very popular for most property owners nowadays. Since Concrete floors are porous material, they need regular cleaning, and the concrete cleaner should be a natural concrete cleaner. Concrete can easily absorb substances, so the various styles of concrete flooring demand various cleaning methods.

4 Tricks for Spotless Concrete Cleaning

When it comes to cleaning concrete floors, the first and foremost thing you need to remove the carpet glue from the concrete floor, all the further steps need to be taken after doing this first step and then removing the dust and other particles on the concrete floor.

How to Clean Concrete Floor?

The first step involved cleaning the concrete floor, be it of any type, and then pick up the right cleaning solution for your floor type in the subheadings given below:

Acidic Solution

This solution is generally adequate for removing stains, dirt, and rust on the exterior portion of your floor. Make sure to take necessary precautions when using these solutions.

pH neutral

This solution is mild and generally used to clean the interior or less dirty decorative portion of concrete flooring.


This solution is a multi-purpose solution used for cleaning both interior and exterior of concrete floor floors. It generally acts as a degreaser for concrete floors and is used as a neutralizer for harsh acidic cleaning.


Removes all the bacterial reactions from the concrete floors, including animal droppings, soil matter, or plant stains.

Tricks and Tips to Clean Indoor Unsealed Concrete Floor

  • Grease spots: To remove the grease spots, just sprinkle some cornstarch or sawdust on the grease and leave it to absorb for up to 24 hours. Wipe it out, and it’s all clean!
  • Dry stains: To remove dry stains on these floors, add a few detergent drops to the stained area. Wait for 45 minutes after then soak and lift the stain. Now pour some amount of boiling water and use a bristle brush on that surface. Clean the area with the help of a mop soaked in clean water to remove any kinds of suds
  • Do: Go for regular inspections and make sure to clean them whenever they come to your notice every week.
  • Don’t: Cleaning with the help of vinegar acid as it can destroy your concrete floor with its acidic property. It is very unsafe to clean unsealed Concrete floors with the help of vinegar. It might create unwanted patterns on your concrete floor, which is known as etching.

4 Tricks for Spotless Concrete Cleaning - unsealed concrete

Tips and Tricks to Clean Outdoor Unsealed Concrete Floor

  • Tire marks: To remove tire marks, make sure to use an alkaline concentration on that stain. Scrub that part and then let it stand for up to four to six hours. Wash the surface and continue with your cleaning.
  • Rust Stains: To remove the rust stains, you should first wet that area and spray some lemon juice or vinegar on the spot with rust stains on it. Leave it for up to 20 minutes before scrubbing it in circular motions with a stiff-bristled brush. Wash off with the help of fresh water and repeat the method above.
  • Do: Make sure to cover up the walls and materials surrounding it before using harsh chemicals to clean the splashes or damaged surfaces.
  • Don’t: Avoid using any metal or wire brushes on concrete floors as they might cause rust spots on them.

A Step-by-step Guide to Cleaning Unsealed Concrete Floor

Unsealed Concrete is exceptionally porous, and you will find more stains on these types of concrete floors. To keep these natural concrete floors clean and maintained, keep an eye on the moment the spots occur and instantly clean them.

4 Tricks for Spotless Concrete Cleaning - cleaning unsealed concrete

These spots are generally shared on these floors due to the use of carpets or some other materials. To altogether remove carpet glue from concrete, make sure to use a good quality solution on the floor that won’t harm its true nature in any possible way.

Check out how you can do it.

  1. First, dissolve three tablespoons of washing soda into one gallon of warm water in a bucket. Follow the surface sweep and soak the mop in that water and then start mopping it in and out from one side of the room to the other.
  2. Now refill the bucket with warm and clean water.
  3. Mop the floor again, but this time all around the room, starting from the same point in the first step. Make sure to soak and clean the mop every 3 square feet while cleaning it, and then continue to do it.
  4. After you are done with the mopping switch on the electric fan in your room or case of other ventilation from windows, just open all of them for the natural air to blow dry the floor real quick.


In the above article, we have mentioned all the tips and tricks that will guide you in cleaning your concrete floors. You can increase the durability of your concrete floors by using a natural concrete cleaner to clean them. All the tips above are based on natural materials that are readily available in the market. Use these tips for further reference and to maintain your concrete floors for a longer duration of time.

Share This Tip With Your Friends!

About the Author: Handyman tips team

The Handyman Tips Team is a group of authors that provides tips on the Handyman Tips website. The Handyman Tips team consists of real handymen, contractors, carpenters, woodworkers, and experts in home repairs, appliance repairs, and landscaping. The team is always there for visitors to the Handyman Tips website. If you can't find the answer to your question on the Handyman Tips website, one of them will reply to you almost immediately if you contact them through the Ask the Handyman page!