How To Remove Rust From A Gun Barrel

Published On: April 8, 20210 Comments on How To Remove Rust From A Gun BarrelLast Updated: February 7, 20243 min read

Rust is the greatest enemy of any metallic object, including your gun barrel. In fact, rust can greatly degrade your vintage and hunting firearm’s value and outlook in a twinkle of an eye. No matter the quality of protective coating your gun barrel has, it will develop rust if placed in favorable conditions.

How To Remove Rust From A Gun Barrel

The rust in your gun’s barrel can significantly affect your shooting aim. However, having proper knowledge on how to clean the rust that accumulates in your gun barrel could be everything you need to ensure that it remains in the right condition. Head over to Guns & Safety Reviews for more in depth information or read on for our brief guide. Here’s how to remove rust from your gun barrel.

Step 1: Get the Essentials

You must be equipped with the right tools to do a great job. Here are the things you will need to clean your gun barrel:

  • A gun cleaning liquid
  • Gun cleaning patches
  • Lubricating oil
  • A gun cleaning rod

Step 2: Disassemble the Gun

You may have to disassemble your gun into parts if necessary. However, some gun brands will come as single pieces, and separation may be unnecessary. Dissembling separates the barrel from the bore.

Step 3: Start the Cleaning Process with the Brush

This step is mandatory whether you took your time to dismantle your gun or not. The cleaning brush must be used alongside the cleaning rod if you want the best results. You may make use of a barrel cleaning rod to fix your cleaning brush. You may only achieve maximum results if you put your gun on a gun stand or hold the bore in such a way that the rod can be inserted with ease.

Add a few drops of the cleaning liquid on the cleaning rod’s brush (directly) and insert the brush into the barrel by moving the rod in and out. Follow this with the cleaning by circling. The best way would be to insert the rod from the backside then pushing it to the front via the other end. Be sure to give the barrel a thorough cleaning. It is here that you may remove the rod from the barrel, then isolate the brush and fix the jag. In essence, the jag will come in handy when you want to clean the patches. This process prepares you for the next step.

How To Remove Rust From A Gun Barrel - spray

Step 4: Put the Cleaning Patch to Use

You may adopt a dry-cleaning patch for cleaning the gun’s rod. Attach this patch to the cleaning rod’s jag after you have cleaned the rod and insert it via the barrel. Dissemble the used patch and adopt a clean one. This is the time to apply the cleaning fluid to the patch.

Step 5: Continue Using the Cleaning Patch Until it is Clean

Don’t put the cleaning patch down until you get a clean patch. You may change the patch then repeat the same process on the next patch. Continue changing the patches until you come out with a clean barrel.

Step 6: Use the Patch to Apply Oil

The oil will make sure that your gun remains as smooth as you want it to be. Be keen not to use cleaning liquid but oil in this stage. This will reduce the tendencies that the gun barrel will rust from inside. These are a few of the simple and straightforward ways to remove rust from your gun barrel!

Share This Tip With Your Friends!

About the Author: Handyman tips team

The Handyman Tips Team is a group of authors that provides tips on the Handyman Tips website. The Handyman Tips team consists of real handymen, contractors, carpenters, woodworkers, and experts in home repairs, appliance repairs, and landscaping. The team is always there for visitors to the Handyman Tips website. If you can't find the answer to your question on the Handyman Tips website, one of them will reply to you almost immediately if you contact them through the Ask the Handyman page!

Leave A Comment