Why you Need Switchboard Thermal Imaging for your Appliances 

Published On: February 22, 20210 Comments on Why you Need Switchboard Thermal Imaging for your Appliances Last Updated: February 8, 20245.2 min read

If you are spending much money on electrical gadgets either for your workplace or home, you want to ensure to keep them in the best condition. To do this, you have to employ all the best industry techniques in ensuring material safety compliance. And one of the highest tests you can carry out is a switchboard thermal imaging on your key electrical appliances.

Why you Need Switchboard Thermal Imaging for your Appliances 

While you could have it done personally if you have the right tools and know-how to read a normal and defective test, it is the best idea to check with a professional. You can check with Thermal Imaging ETS to help you with all the standard testing of your electrical appliances. And you can bet that they follow all the best safety compliance available for equipment and tools. Want to know more about switchboard thermal imaging? You can find out in the sections below.

What is Switchboard Thermal Imaging?

This is a process of detecting faults within the inner workings of a device. It is done with the application of intense heat to read the temperature levels of the internal components of the switchboard of the appliance. If the device is found to generate excess heat, it may be due for maintenance. It would ordinarily be impossible to take the switchboard’s heat readings without using a thermal imaging process. The camera lens attached to an infrared sensor takes an image of the switchboard, which the technician then inspects. In most cases where there is a flaw, you will clearly be able to see it on the image captured.

Why Use Switchboard Thermal Imaging?

If you are wondering if you really want to schedule an electrical inspection of your home or office devices, you certainly want to. If you have a few expensive devices to maintain or work around the clock, like in the case of factory equipment, an inspection is a must. Still, doubting the usefulness? Below are reasons why you should consider switchboard thermal imaging for your device

Get a Detailed Equipment Report

For factory or other heavy-duty home appliances, you surely want to know the condition they are in at all times. This would help you understand how best to operate them and schedule repairs as necessary. If you use a professional service, there is a good chance you will be presented with a report card showing just what you need to know moving forward.



Prevent Faults and Damages

You know that saying, prevention is better than cure? Well, it exactly what you aim to do with a switchboard thermal imaging test. With the use of infrared radiation, you can check the internal components of your devices and get a situation report on the working condition. This way, you can quickly make repairs and replacements before they escalate into something serious. There are more tips here on keeping your appliances in the best working condition.

Saves Expenses

You will indeed have to spend more money making repairs or getting new equipment in the event of a breakdown. And you can avoid this if you carry out a switchboard test and make the repairs urgently. For an inexpensive test that only lasts a few seconds, you would agree that it is worth all the investments.

Prevent Workplace Accidents

You will also be preventing any possible workplace hazard such as a fire. If you work in a highly flammable environment, having all your equipment in strict compliance would be ideal. And having the switchboard tested is part of the inspection procedure.

Why you Need Switchboard Thermal Imaging for your Appliances - thermal imaging

The Testing Procedure

First, you want to expose the internal workings of the device. So you will need to take out the casing or protective covers to get to the switchboard. Once exposed, it can be easy to take readings using your infrared imaging device. You want to ensure that you hire an expert to carry out the tests. They have to be certified to carry out the repairs. It is essential that you confirm that they employ the latest procedures in checking for appliance safety compliance. And afterward, you should expect a report showing the findings with notes on what to do to correct any anomaly.

How Often Should You Inspect?

You may wonder how often you should take temperature readings of your devices. And this will depend on several factors. These could include how often you use the device and the condition. You will expect a device that runs continuously to require more attention than one that works occasionally. A new machine would also not be needing much attention compared to an older one. When it comes to how often to check your equipment safety, it may be best to get an expert opinion. Most factory owners with many appliances to manage usually have a repair and maintenance company to help them out. And if you are not already working with a similar service for your factory equipment, you want to consider it now. You can check the internet for companies that provide such services near you or ask close associates who work in electrical installations and maintenance.

How Much Does It Cost?

The cost of a switchboard thermal analysis would depend on the extent of work to be done. To analyze an entire building or company equipment, you indeed would spend more than when testing a few kits. On average, you can spend up to $1000 or more if you work with a safety compliance expert.

Final Note

When it comes to maintaining safety in the workplace and home, you want to consider everything at your disposal. And there is a lot you can do to avoid accidents in the workshop. One way is to ensure that employees follow a strict safety protocol when at work. The link here https://safety.lovetoknow.com/Office_Safety_Tips has more on workplace safety you should check out. Also, provide fire extinguishers and have a detailed plan for the event of an accident. It will be in your best interest to check with a professional outfit to help with scheduling and performing your switchboard thermal imaging tests to ensure safety compliance at all times.


Share This Tip With Your Friends!

About the Author: Handyman tips team

The Handyman Tips Team is a group of authors that provides tips on the Handyman Tips website. The Handyman Tips team consists of real handymen, contractors, carpenters, woodworkers, and experts in home repairs, appliance repairs, and landscaping. The team is always there for visitors to the Handyman Tips website. If you can't find the answer to your question on the Handyman Tips website, one of them will reply to you almost immediately if you contact them through the Ask the Handyman page!

Leave A Comment

Related Posts