It’s quite easy to dismiss inspection of a new home with the argument that it is brand new and therefore ought to have no defects at all. Unfortunately, this is a common opinion held by homeowners, yet it is all to wrong and poses a major threat and risk to the project’s future. There is also the misleading aspect that after all local authorities will inspect it before issuing a certificate of occupancy.
In spite of these misconceptions, a home inspection is an essential procedure in ensuring that your construction is safe for its occupants and any other parties. In most cases, local authorities check for compliance with the minimum set standards. On the other hand, a third-party inspection is supposed to be a detailed look into all aspects of the construction. There are several reasons why this in-depth interrogation of your building is essential. Here are some candid reasons.
Identify Common Mistakes Before Occupation
Inspection is not necessarily about giving the construction a clean bill of health. It is a useful step in identifying structural defects that might have occurred during construction. Common defects that could be found on new constructions include Poor electrical installations, plumbing problems, drainage and grading, improper HVAC installations among others. A home inspection will seek to identify such mistakes and recommend the appropriate correctional measures.
Help Repair Damages Before they Cause More Harm
If you occupy your building and then identify some problems later, it will be hectic to carry out repairs. There is a lot of distraction from noise and the workers walking around. It would be much easier if an inspection is done, the errors identified and corrected before the occupation. This leaves you to handle just minor pieces where the need arises once the premises are occupied. In view of this, consider undertaking inspection well before the house begins to be used.
To Comply with Legal Requirements
In most jurisdictions, authorities conduct an inspection of new buildings and issue necessary compliance certificates. However, this kind of inspection does not offer a thorough insight of any defects or poorly done works in the construction. That’s why the opinion of an expert comes in handy.
Building codes across several countries provide just minimum standards. A private construction inspector will endeavor to go beyond these and dig deeper into elements that could cause problems in the future. In addition, most inspection departments are overwhelmed and might just give a visual look at your new construction. Certainly, you cannot depend on this kind of inspection to confirm your building as safe.
To Avoid hitches during resale
If you fail to have a proper inspection done on your new premises and decide to sell the construction at some point you may have great challenges with unforeseen defects. Deficiencies that are traceable to the original building are likely to be discovered at this point and it will be too late to bring a builder on board. This ruins your chances of quickly sealing the deal and instead you might need to spend more fixing the problems. To avoid such problems, have your home inspected professionally before occupation.
Confirm Actual Building To Manufacturer’s Specification
Several aspects of your building come with specific manufacturer specifications. However, the construction process may not exactly adhere to the specifications for one reason or the other. Even when you hire the best builders and work with the intention of carrying out the project perfectly, some problems are bound to occur.
It is not always easy to undo what the builders have done, but the inspection will advise where the standards are good safe, durable and usable in the current state. At this point, the need for an inspector is to apply a different set of eyes from what the builders have done and give proper guidance.
Inspector’s points of Interest
Home inspectors will break their work into various phases and categories. These may include water and drainage inspection (also known as pre-pour inspection), framing inspection and the final, overall inspection.
Water/Drainage inspection: The inspector will check for trenches and soil, general draining and grading, water lines, trenches and soil as well as waste and vent lines.
Framing, the inspection will check out for the beams, stairwells, nails, screws, studs and plates, fire blocking, HVAC as well as ducting and wiring.
Final inspection will check at the status of all the above and also include the doors and windows, roof, chimney, all exterior spaces such as walkways, driveways. The attic must be given special attention to avoid rodents and pests from living there. Inspection is a good building and pest Melbourne control measure.
Many home buyers hardly give the idea of inspection of a new building a chance. However, this can turn out to be a big disaster later on, and a costly mistake. It is strongly recommended that you give home inspection the required attention. It is ultimately a well-deserved investment and that will give you the assurance and peace of mind.
Leave A Comment