A bidet is a bathroom accessory made to clean your privates after using the restroom. Nothing can take the place of a bidet for anyone who wishes to stay clean and fresh regularly without using a shower or bathtub.
Types of Bidets
1. Vertical Bidet Spray
The P-trap that protrudes horizontally from the wall is where the drainage from the vertical spray bidet joins. The standing spray bidet is the least expensive to buy and install because it is the most popular bidet style.
2. Bathroom Bidet Unit
The vertical spray bidet has evolved into a toilet bidet system. This bidet can be the right choice for you if you use a bidet frequently.
3. Toilet Bidet Seat
The current toilet seat is swapped out for the bidet seat. The bidet seat is plugged into the closest GFCI outlet, and water that would otherwise fill the toilet tank is switched to fill it.
These Steps Can Be Used to Install a Bidet Toilet Seat:
1. Ideally, Your Toilet Will Include Instructions
Before placing your Bidet fitting order, read the measurements and list the significant ones to compare to the location of your toilet. The process should be essentially the same for most of this bidet fitting.
2. Remove or Swap Out Your Current Toilet Seat and Lid
In most cases, the bolts holding the seat are either top mounted with a threaded screw from the top or secured by either nylon or metal nuts on the underside of the toilet pan. For the bidet to be installed, these must be taken out. Your new bidet should include T adapters, small-bore plastic tubing, and the necessary connectors and reducers.
3. Find the Water Isolation Valves and Close Them
If you can’t find a nearby stop valve, you may need to look under the sink or see the main stop cock for your house. To drain any remaining water from disconnected piping, place a towel or a container, such as a bucket, underneath.
4. Discard the Old Bidet and Reinstall the Toilet Seat and Lid
If your measurements were accurate when you ordered it, the new bidet should fit the holes in your toilet pan that take the seat hinges.
5. Turn off the Water and Unplug the Flexible Hoses From the Faucets
As shown, you’ll probably need a plumber’s basin wrench to remove the existing fittings.
6. Connect the Flexible Hose and Small-bore Pipe With T Connectors
Using a spanner or water pump pliers, attach the flexible hose to the T connection and tighten it while being careful not to overtighten the nylon threads. With your hands, firmly attach the tiny bore pipe to the bathroom sink’s faucets. The main stop cock valve for your home or the isolator stop valves should be opened. If you notice any leaks, check for them and fix them. Your brand-new bidet should now be operational.
What is a Bidet Converter Kit?
With little work and installation know-how, you can convert your current toilet to one with washing capabilities using a bidet converter kit. The following kits are the best bidet converter kit:
- Best overall: Remote-controlled Bemis bio bidet bliss elongated toilet seat.
- Best attachment: Non-electric bidet kit attachment, Luxe Neo 185.
- Best handheld sprayer: Arofa Handheld Bidet Sprayer with Adjustable Water Pressure.
- Best budget seat: Brondell Swash, non-electric bidet toilet seat.
Best slim design: Veken brass inlet dual nozzle bidet attachment.
The Bottom Line
There are other benefits to using a bidet, but these are the most significant ones:
- Saving cash
You may stop using most of your toilet paper with bidet converter kits! But, long-term financial savings aside, you’ll also lessen your impact on the environment.
- Enhancing hygiene
Bidet seats are far more effective at cleaning and can aid in the prevention of yeast infections, UTIs, and other hygiene-related issues.
- Taking Care of the Environment
Using less toilet paper can lessen your environmental effect by buying a bidet converter kit.